Select Page

DYNARIC

AUTOMATIC TOTE STRAPPING & MACHINE

MODEL: N3400A

The N3400A is a high performance, energy saving, operator-less strapping machine ideal for banding tote for Pharmaceutical and Distribution Centers. The N3400A strapping banding machine is equipped with variable speed powered belts that can be adjusted to the exact speed needed to keep your production line moving. This fully automatic strapping banding machine uses standard 120v power to operate the 24volt direct drive servo motors. The 24v direct drive servo motors not only save energy but also increasing machine reliability, in-turn reducing downtime. Although the unit can be switched to manual and used like an offline unit, the N3400A fully automatic strapping machine is designed to operate automatically using adjustable photo switches to detect incoming packages, making this strapping machine ideal for pharmaceutical and distribution centers securing totes, cut paper and containers.
To decrease downtime in between coil changes the N3400A is equipped with an externally located dispenser that can utilize Dynaric XL coils.

The N3400A is equipped with an automatic strap feeding system as well as an “end of strap” sensing system with automatic strap discharge once a coil has been completed.

  • Up to 35 Bundles\minute

  • Wear-free, Energy saving direct-drive-motors

  • Wear-free Strap-frame by stainless steel guide

  • ASLF ‘Anti-Strap-Loss-Function’ Constant strap control

  • Automatic Strap feed

  • Strap width 5 – 12 mm

  • DAT ‘Direct-Access-Technology’

  • The exclusive eject function avoids strap jam

  • Torque controlled strap tension, adjustable

  • Upstream and downstream interlocks

  • Conveyor speed steplessly adjustable

  • Intuitive operator interface

  • Machine movable

  • MFT ‘Mono-Frame-Technology’

  • Bundle press, optional

  • SAO ‘Safe and Open’ – Safe without protection doors

  • Table height steplessly adjustable

  • Bundle flow control

Overall Width
  • 23.9″ (608 mm)
Overall Length
  • 47.2″ (1200 mm)
Overall Height
  • 60.6 – 69.6″ (1540 – 1770 mm)
Table Height
  • 30.3 – 39.3″ (770 – 1000 mm)
Weight
  • 639 lbs (290 kg)
Cycle Time
  • Up to 35 cycles per minute
Cycle Initiation
  • Photo eye sensor
Standard Arch Size
  • W 600 mm x H 600 mm
  • note: Many sizes are available (in 200 mm increments)
Strap Size
  • 1/4″ – 1/2″ (5 mm – 12 mm)
Package Size
  • Max. governed by arch
  • Min. 1.5″ H x 3″ W
Tension
  • Adjustable electronic control
Seal Head Location
  • Bottom
Sealing Method
  • Heat Seal
Mobility
  • 3″ Casters
Dispenser
  • Externally located
  • 8″ or 9″ I.D./8″ Face/18″ O.D.
Power
  • 120 V single phase