Select Page

DYNARIC

AUTOMATIC PLASTIC BANDING STRAPPING MACHINE

MODEL: N3400

The Fast Banding, N3400 Strapping Machine is equipped standard 120v power to operate the reliable 24volt direct drive servo motors. Servo Motors use less energy to operate over a standard electric motor and they provide incredible reliability, reducing the amount of moving parts and wear items, saving you money by reducing machine and production downtime.

For routine maintenance or cleaning, the strap path can be easily opened without tools with the new DAT (Direct Access Technology) system. With a pull of a lever the DAT system opens the machine strap path allowing you to perform routine cleaning of the strapping unit and strap track. This keeps machine downtime to a minimal!

To further decrease downtime, the FAST N3400 Banding Strapping Machine can utilize Dynaric XL coils. Dynaric XL coils are produced with the same high quality non-metallic resin used in our entire line of plastic strap. What our XL coils do have that the others coils don’t is the extra footage per coil. Less coil changes + less production down time = Quicker Return on Investment!

N3400 Plastic Banding Strapping Machine PDF

The N3400 can be customized to meet the requirements of any packaging environment.

  • Up to 55 cycles per minute, depending on tension setting and package size

  • Wear-free, Energy Saving 24VDC direct-drive motors

     

  • Wear-free strap frame with stainless steel guides

     

  • ASLF ‘Anti-Strap-Loss-Function’ constant strap control

     

  • Power switch with lockout

     

  • Automatic strap feed

     

  • Strap width 5 – 12 mm

     

  • Strap end detection system with automatic discharge of remaining strap

     

  • Internal dispenser

     

  • The exclusive eject function avoids strap jam

     

  • Operation terminal with soft button

     

  • Automatic cycle start by tabletop sensor

     

  • Footbar at the operator side

     

  • Adjustable torque controlled strap tension

     

  • MFT ‘Mono-Frame-Technology’

     

  • Power connection located at the top of the arch or the bottom of the machine

     

  • Table height steplessly adjustable

     

  • Hinged removable tabletops

Overall Width
  • 32.5″ (828 mm)
Overall Length
  • 37.6″ (956 mm)
  • 47.6″ (1210 mm) with external dispenser
Overall Height
  • 61.6 – 66.3″ (1565 – 1685 mm)
Table Height
  • 31.3 – 35.8″ (795 – 910 mm)
Weight
  • 386 lbs (175 kg)
Cycle Time
  • Up to 55 cycles per minute
Cycle Initiation
  • Photo eye sensor or footbar
Standard Arch Size
  • W 600 mm x H 600 mm
Optional Arch Size
  • W 800 mm x H 400 mm
Strap Size
  • 1/4″ – 1/2″ (5 mm – 12 mm)
Package Size
  • Max. governed by arch
  • Min. 1.5″ H x 3″ W
Tension
  • Adjustable eletronic control
Seal Head Location
  • Bottom
Sealing Method
  • Heat seal
Mobility
  • 3″ casters
Dispenser
  • Internally or externally located
  • 8″ or 9″ I.D./8″ Face/18″ O.D.
Power
  • 120 Volt Single Phase