Contact Us

Contact Us

WULFTEC

AUTOMATIC TURNTABLE STRETCH WRAPPER

MODEL: SMHPA-200

The SMHPA-200 mode is a standard base high-profile turntable. Features include 5,000 lbs load weight capacity, UL508A approved control panel, 100% Structural Steel Construction, and Wulftec’s exclusive 20″ NO-THREAD® Powered Pre-Stretch Carriage (30″ optional).
  • 5,000 lbs load weight capacity
  • NEMA 4/12 control panel dust tight and waterproof
  • The control panel is UL508A approved
  • 100% Structural Steel Construction
  • Superior Electrical/Electronic Design including Allen Bradley MicroLogix PLC and AC drives
  • Wulftec’s exclusive 20″ NO-THREAD® Powered Pre-Stretch Carriage (30″ optional)
  • Easily available non-proprietary parts
  • State-of-the-art electrical control panel with all finger safe electrical components
  • Carriage lifting chains enclosed inside tower for operator safety
  • Automated cut/clamp & wipe system.
Production Rate
  • 55 loads per hour
Machine Dimensions
  • 109.50″ L x
  • 51″ W x
  • 99″ H
Maximum Load Size
  • 51″ L x
  • 51″ W x
  • 80″ H
Load Weight
  • 5000 lbs
Approximate Shipping Weight
  • 1400 lbs
Electrical Requirements
  • 120 V /
  • 1 ph /
  • 60Hz
  • 15A
Pneumatic Requirements
  • 3 cfm @
  • 80 psi
Controls
  • Allen Bradley MicroLogix 1200 PLC
  • 24V control system
  • Current overload protection
  • NEMA 4/12 control cabinet
  • Autoheight sensing photoeye
  • Power on/off switch and status light
  • Start/stop push button
  • Large emergency stop (push / pull type)
  • Manual carriage up/down function
  • Variable table speed (16 RPM) with automatic home position
  • Separate up/down carriage speeds adjustment
  • Separate top and bottom wrap selectors (0-9)
  • Reinforced wrap/manual rotation control
  • Film tension adjustment
  • Top cover pause switch (Splash proof program)
  • Mode switch (Manual or Automatic)
  • Pull cord with 40′ of cable (to be installed by customer)
  • Separate station on front of tower with clamp jog and an additional e-stop
  • Lack of film alarm
Structure
  • 14 gauge formed steel tower
  • Forklift Portable base design
  • Heavy duty structural steel construction
Film Delivery System
  • 20″ NO-THREAD® Powered Pre-Stretch Carriage
  • 1 HP AC motor with Allen Bradley variable frequency drive
  • Lifetime warranty on pre-stretch rollers blue compound
  • Film force release for easy pull at start and end of cycle
  • 50-400% pre-stretch ratio (preset to customer spec, Std 200%)
  • Electronic film tension control with analog sensor
  • Film roping bar
  • Lexan roller cover for operator safety
  • Proximity sensor on carriage gate to ensure gate is properly closed
Film Tail Treatment
  • Automated Cut/Clamp & Wipe system
  • Pulse controlled cutter
  • Film alignment arm & Brush on film tail treatment
Film Carriage Drive
  • 1 HP AC motor with Allen Bradley variable frequency drive
  • Two #50 carriage lifting chains enclosed in tower for safety
  • Bearing supported maintenance free guide wheels
Turntable
  • 51″ x 51″ octagonal table 3/8″ thick
  • 13 5/8″ table height
  • 4 casters with polyurethane coating and tapered roller bearings
Turntable Drive
  • 0-16 RPM variable speed
  • 1 HP AC motor with Allen Bradley variable frequency drive
  • #50 ANSI heavy duty chain drive
  • Electronic soft start/stop
  • Positive turntable alignment controlled by proximity sensor
Technical Information
  • The machine is provided with a manual including electro/mechanical schematics and drawings, troubleshooting guide & Installation instructions
  • Notes:
  • Optional
  • Production rate based on load configuration and machine options
  • Overall dimensions of machine in operation
  • All machine specifications are subject to change without prior notice
  • Please consult your distributor for prices.
  • Please note that retrofits are to be installed by a Certified Wulftec Technician.

CARRIAGE

30″ NO-THREAD® Powered Pre-Stretch Carriage
Carriage adaptor bracket for 20″ film on 30″ carriage
Pneumatic roping dual
Pneumatic roping dual – extra photoeye
Pneumatic roping single

CONTROLS

Foot pedal start / stop
Lanyard remote
Remote push button station
Safety control lockout
Upgrade from standard to deluxe
Warning Alarm / Horn
Warning flashing light

EXTENSION

Wrap height extension – 104in
Wrap height extension – 116in
Wrap height extension – 92in

HEAT SEAL

Arm mounted cut & seal

MOTORS

Wash down motors
Wash-down motors for top platen

PAINT

Custom color
Epoxy paint
Steel-it paint

PHOTOEYE

Dark load detection

SAFETY

Electric dump valve
Safety fencing
Safety light curtains
Safety Package

SCALE

Electronic scale

TEMPERATURE PACKAGE

Cold A (32 to 41°F / 0 to 5°C)
Cold A (32 to 41°F / 0 to 5°C) – Deluxe panel
Cold B (5 to 32°F / -15 to 0°C)
Cold B (5 to 32°F / -15 to 0°C) – Deluxe panel
Fan & Exhaust
Warm A (up to 115°F / up to 46°C)
Warm B (104°F / 40°C and up)

TOP PLATEN

Electric top platen

TRANSFORMER

Customized transformer
Standard transformer
Transformer for Cold C temperature package

TURNTABLE

60in round turntable
72in round turntable
90° exit
Loading...