Select Page

WULFTEC

SEMI-AUTOMATIC STANDARD BASE TURNTABLE STRETCH WRAPPING SYSTEM

MODEL: SML-200

The SML-200 model is a standard base, all steel structure, low-profile turntable. It features a 65″ diameter turntable, 5,000 lbs load weight capacity, abd a maximum load size of 65″L x 55″W (78″ diamter). The SMART machine has been designed to allow you to upgrade the control panel at any time, upgrade the base at any time, upgrade the carriage at any time, and change the tower/wrap height at any time.
  • 5,000 lbs load weight capacity
  • NEMA 4/12 control panel dust tight and waterproof
  • The control panel is UL508A approved
  • 100% Structural Steel Construction
  • Superior Electrical/Electronic Design including Allen Bradley MicroLogix PLC and AC drives
  • Wulftec’s exclusive 20″ NO-THREAD® Powered Pre-Stretch Carriage (30″ optional)
  • Easily available non-proprietary parts
  • State-of-the-art electrical control panel with all finger safe electrical components
  • Carriage lifting chains enclosed inside tower for operator safety
Production Rate
  • 55 loads per hour
Machine Dimensions
  • 119.50″ L x
  • 66″ W x
  • 86.50″ H
Load Weight
  • 5000 lbs
Approximate Shipping Weight
  • 2500 lbs
Electrical Requirements
  • 120 V /
  • 1 ph /
  • 60Hz
  • 15A
Controls
  • Allen Bradley MicroLogix 1000 or 1200 PLC
  • 24V control system
  • Current overload protection
  • NEMA 4/12 control cabinet
  • Autoheight sensing photoeye
  • Power light indicator (Basic)*
  • Power on/off switch and status light (Standard)*
  • Start/stop push button
  • Large emergency stop (push / pull type)
  • Manual carriage up/down function
  • Variable table speed (16 RPM) with automatic home position with automatic home position
  • Carriage speed adjustment
  • Top and bottom wrap selectors
  • Reinforced wrap/manual rotation control
  • Film tension adjustment
  • Lack of film alarm
Structure
  • 14 gauge formed steel tower
  • Forklift Portable base design from both ends
  • Heavy duty structural steel construction
Film Delivery System
  • 20″ NO-THREAD® Powered Pre-Stretch Carriage
  • 1 HP AC motor with Allen Bradley variable frequency drive
  • Lifetime warranty on pre-stretch rollers blue compound
  • Film force release for easy pull at start and end of cycle
  • 50-400% pre-stretch ratio (preset to customer spec, Std 200%)
  • Electronic film tension control with analog sensor
  • Film roping bar
  • Lexan roller cover for operator safety
  • Proximity sensor on carriage gate to ensure gate is properly closed
Film Carriage Drive
  • 1 HP AC motor with Allen Bradley variable frequency drive
  • Two #50 carriage lifting chains enclosed in tower for safety
  • Bearing supported maintenance free guide wheels
Turntable
  • 65″ dia. 3/8″ steel plate
  • 32 heavy duty non metallic lube-free table supports
  • 3″ table height
  • 2-3/8″ high base
  • Ramp accessible on all three sides (consult factory when ordering more than one ramp)
Turntable Drive
  • 0-16 RPM variable speed
  • 1 HP AC motor with Allen Bradley variable frequency drive
  • #50 ANSI heavy duty chain drive
  • Electronic soft start/stop
  • Positive turntable alignment controlled by proximity sensor
Technical Information
  • The machine is provided with a manual including electro/mechanical schematics and drawings, troubleshooting guide & Installation instructions
Notes:
  • Optional
  • Production rate based on load configuration and machine options
  • Overall dimensions of machine in operation
  • All machine specifications are subject to change without prior notice
  • Please consult your distributor for prices.
  • Please note that retrofits are to be installed by a Certified Wulftec Technician.

Carriage

20″ hydraulic carriage (no pre-stretch)30″ hydraulic carriage (no pre-stretch)
30″ NO-THREAD® Powered Pre-Stretch Carriage
Carriage adaptor bracket for 20″ film on 30″ carriage
Manually Adjustable Dual Roping Bar
Manually Adjustable Single Roping Bar
Pneumatic roping dual
Pneumatic roping dual – extra photoeye
Pneumatic roping single

Clamp

SMART start clamp & pull cord

Controls

E-panel
Foot pedal start / stop
Lanyard remote
Lanyard remote for dual turntables
Pull cord
Remote push button station
Remote push button station
Remote push button station for dual turtables
Safety control lockout
Upgrade from basic to standard
Upgrade from standard to deluxe
Warning Alarm / Horn
Warning flashing light
Wrap sequence for basic panel

Extension

Wrap height extension – 104in
Wrap height extension – 116in
Wrap height extension – 128in
Wrap height extension – 92in

Motors

Wash down motors
Wash-down motors for top platen

Paint

Custom color
Epoxy paint
Steel-it paint

Photoeye

Dark load detection

Ramp

Ramp
Ramp extension
Ramp with scale option selected

Safety

Safety fencing
Safety fencing for dual turntable units
Safety light curtains
Safety light curtains for dual turntable units

Scale

Electronic scale

Temperature package

Cold A (32 to 41°F / 0 to 5°C)
Cold A (32 to 41°F / 0 to 5°C) – Deluxe panel
Cold B (5 to 32°F / -15 to 0°C)
Cold B (5 to 32°F / -15 to 0°C) – Deluxe panel
Cold C (-31 to 5°F / -35 to -15°C)
Fan & Exhaust
Warm A (up to 115°F / up to 46°C)
Warm B (104°F / 40°C and up)

Top platen

Electric top platen

Transformer

Customized transformer
Standard transformer
Transformer for Cold C temperature package

Turntable

90° exit
Free roller top
Free roller transition
High speed 24RPM
Second turntable