WULFTEC
PORTABLE AUTOMATED LOW PROFILE TURNTABLE STRETCH WRAPPING SYSTEM
MODEL: SMLPA-200
The SMLPA-200 model is an automated standard base low-profile turntable that is rugged and offers precise wrapping for an extremely affordable price. Features include 4 casters with polyurethane coating and tapered roller bearings, proven cut and wipe film treatment system, #50 ANSI heavy duty chain drive, 5,000 lbs capacity, capable of wrapping up to 55 loads per hour.
- 4,000 lbs load weight capacity
- NEMA 4/12 control panel dust tight and waterproof
- The control panel is UL508A approved
- 100% Structural Steel Construction
- Superior Electrical/Electronic Design including Allen Bradley MicroLogix PLC and AC drives
- Wulftec’s exclusive 20″ NO-THREAD® Powered Pre-Stretch Carriage (30″ optional)
- Easily available non-proprietary parts
- State-of-the-art electrical control panel with all finger safe electrical components
- Carriage lifting chains enclosed inside tower for operator safety
- Automated cut/clamp & wipe system.
Production Rate
- 55 loads per hour
Machine Dimensions
- 119.50″ L x
- 66″ W x
- 86.50″ H
Maximum Load Size
- 50″ L x
- 50″ W x
- 80″ H
Load Weight
- 5000 lbs
Approximate Shipping Weight
- 2800 lbs
Electrical Requirements
- 120 V /
- 1 ph /
- 60Hz
- 15A
Controls
- Allen Bradley MicroLogix 1200 PLC
- 24V control system
- Current overload protection
- NEMA 4/12 control cabinet
- Autoheight sensing photoeye
- Power on/off switch and status light
- Start/stop push button
- Large emergency stop (push / pull type)
- Manual carriage up/down function
- Variable table speed (16 RPM) with automatic home position
- Separate up/down carriage speeds adjustment
- Separate top and bottom wrap selectors (0-9)
- Reinforced wrap/manual rotation control
- Film tension adjustment
- Top cover pause switch (Splash proof program)
- Mode switch (Manual or Automatic)
- Pull cord with 40′ of cable (to be installed by customer)
- Separate station on front of tower with clamp jog, an additional E-stop
- Lack of film alarm
Structure
- 14 gauge formed steel tower
- Forklift Portable base design (from back only)
- Heavy duty structural steel construction
Film Delivery System
- 20″ NO-THREAD® Powered Pre-Stretch Carriage
- 1 HP AC motor with Allen Bradley variable frequency drive
- Lifetime warranty on pre-stretch rollers blue compound
- Film force release for easy pull at start and end of cycle
- 50-400% pre-stretch ratio (preset to customer spec, Std ext%)
- Electronic film tension control with analog sensor
- Film roping bar
- Lexan roller cover for operator safety
- Proximity sensor on carriage gate to ensure gate is properly closed
Film Tail Treatment
- Automated Cut/Clamp & Wipe system
- Pulse controlled cutter
- Film alignment arm & Brush on film tail treatment
Film Carriage Drive
- 1 HP AC motor with Allen Bradley variable frequency drive
- Two #50 carriage lifting chains enclosed in tower for safety
- Bearing supported maintenance free guide wheels
Turntable
- 65″ dia. 3/8″ steel plate
- 32 heavy duty non metallic lube-free table supports
- 3-1/8″ table height
- 2-3/8″ high base with full surround for safety and strength
- Ramp accessible on all three sides
Turntable Drive
- 0-16 RPM variable speed
- 1 HP AC motor with Allen Bradley variable frequency drive
- #50 ANSI heavy duty chain drive
- Electronic soft start/stop
- Positive turntable alignment controlled by proximity sensor
Technical Information
- The machine is provided with a manual including electro/mechanical schematics and drawings, troubleshooting guide & Installation instructions
Notes:
- Optional
- Production rate based on load configuration and machine options
- Overall dimensions of machine in operation
- All machine specifications are subject to change without prior notice
- Please consult your distributor for prices.
- Please note that retrofits are to be installed by a Certified Wulftec Technician.
Air compressor
Air compressor
Carriage
30″ NO-THREAD® Powered Pre-Stretch Carriage
Carriage adaptor bracket for 20″ film on 30″ carriage
Pneumatic roping dual
Pneumatic roping dual – extra photoeye
Pneumatic roping single
Controls
Foot pedal start / stop
Lanyard remote
Remote push button station
Safety control lockout
Upgrade from standard to deluxe
Warning Alarm / Horn
Warning flashing light
Extension
Wrap height extension – 104in
Wrap height extension – 116in
Wrap height extension – 128in
Wrap height extension – 92in
Heat seal
Arm mounted cut & seal
Motors
Wash down motors
Wash-down motors for top platen
Paint
Custom color
Epoxy paint
Steel-it paint
Photoeye
Dark load detection
Ramp
Ramp
Ramp extension
Ramp with scale option selected
Safety
Safety fencing
Safety light curtains
Scale
Electronic scale
Temperature package
Cold A (32 to 41°F / 0 to 5°C)
Cold A (32 to 41°F / 0 to 5°C) – Deluxe panel
Cold B (5 to 32°F / -15 to 0°C)
Cold B (5 to 32°F / -15 to 0°C) – Deluxe panel
Fan & Exhaust
Warm A (up to 115°F / up to 46°C)
Warm B (104°F / 40°C and up)
Top platen
Electric top platen
Transformer
Customized transformer
Standard transformer
Transformer for Cold C temperature package
Turntable
90° exit
High speed 24RPM